Product Description

The JBL SRX815P 15″ Two-Way Bass Reflex Self Powered System is suitable for live performance, mobile and fixed DJ, sound system rental, touring, and permanent installation applications. Using JBL Premium Transducers, 2000W peak of Crown Class-D Drivecore Amplification, and a full user configurable DSP system with HiQnet network control (via Ethercon connection to third party router) and 50 JBL engineered application presets, the system can deliver a frequency response of 44 to 20,000 Hz (-3 dB) (-3 dB) and a maximum SPL of 137 dB.

The rear panel of the speaker features a power button with LED indicator, a pair of balanced XLR/TRS combo input connectors, an LCD display screen with master encoder knob and back button for accessing presets, a pair of XLR-3M output connectors for sending to additional speakers, an XLR-3M mix output connector for sending audio out to an external source, and an Ethercon connector with LINK and DATA for network control via standard Ethernet cable to a third party router for iOS and Android mobile remote control.

Transducer Design

  • Features premium JBL transducers. High frequencies are handled by an annular polymer diaphragm compression driver that features a best in class 3″ voice coil coupled to a 1.5″ throat opening. Using a neodymium magnet, the compression driver is lightweight, efficient, and extremely powerful. This delivers very high power levels with reduced distortion and increased phase coherence resulting in smooth, crystal clear high frequencies.
  • Uses a 15-inch woofer with JBL’s patented Differential Drive Technology for reduced weight while maximizing power amp efficiency. 3″ voice coils and dual ferrite drivers deliver exceptionally low distortion and extended low frequency response
  • DSP Control

    Using a 400 MHz DSP Sharc Chip, the speaker offers 20 PEQs, 2 seconds of delay, signal generators, input mixing, amplifier monitoring, and 50 user presets with 96 kHz FIR filters and LevelMax Limiting

    Compatibility

    Incorporates V5 JBL Tunings for compatibility with flagship Vertec and VTX touring systems

    LCD Screen

    Supports fast setup and configuration

    Drivecore Amplification by Crown

    Offers 103 dB signal-to-noise ratio with 2000W Peak available Class-D power

    HiQnet Network Control

    Allow for configuring the system via wired Ethercon connector or wireless connection when linked to a third party router for use with Audio Architect, HiQnet Motion Control, and standalone applications for iOS and Android mobile devices

    JBL SRX815P Specs

    PA Speaker
    Configuration Active 2-Way
    Total Power Capacity 2000 W Peak
    1500 W RMS
    Amplifier Class Class-D
    Performance
    Frequency Response 44 Hz to 20 kHz -3 dB
    Maximum SPL 136 dB
    137 dB
    Coverage Angle 90° H x 50° V
    Gain Range Line Input:
    21 dB
    Aux Input:
    3 dB
    Mic Input:
    45 dB
    Line Input:
    20 dBu
    Aux Input:
    8 dBu
    Mic Input:
    -4 dBu
    I/O Impedance Input:
    40 Kilohms (Balanced)
    20 Kilohms (Unbalanced)
    Connectivity
    Audio I/O 2 x Combo XLR-1/4″ TRS Input
    2 x XLR 3-Pin Male Output
    1 x XLR 3-Pin Mix Output
    Signal Processing
    Crossover 2 kHz
    Power
    AC Input Power 100 to 240 VAC, 50 / 60 Hz 
    Current Consumption 120 VAC:
    2.2 A (1/8 Power)
    5.6 A (1/3 Power)
    Physical
    Mounting 2 x 1.4″ / 36 mm Pole Socket
    12 x M10
    Handles 3
    Cooling Fan (Variable Speed)
    Construction Material Perforated Metal Grille, Plywood
    Dimensions 27.2 x 18 x 18.8″ / 69.1 x 45.8 x 47.8 cm
    Weight 63 lb / 28.6 kg