Product Description

Preserve your favorite 33 1/3 and 45 rpm vinyl records as digital files with your computer and the silver Audio-Technica AT-LP120XUSB Stereo Turntable. Its USB output lets you connect a computer to convert your tracks into digital audio files. This turntable also has a built-in switchable preamplifier, allowing you to connect it directly to your stereo system or speakers of choice via RCA cables. A removable dust cover, USB cable, RCA audio cable, and 45 rpm adapter are included.

Fully manual operation with 33 1/3, 45, and 78 rpm speeds
Anti-resonance, die-cast aluminum platter with felt mat
Dual magnet phono cartridge with elliptical stylus
Cartridge is compatible with nearly any VM95 series replacement stylus
S-shaped tonearm with hydraulically damped lift control and lockable rest
Switchable built-in preamplifier for phono- or line-level output
Stroboscopic platter with speed indicator
Variable pitch control with quartz speed lock
Removable plug-type target light for easier queuing in low light
Damped base construction for reduced low-frequency feedback coloration
AC adapter handles AC/DC conversion outside the chassis, helping to reduce noise in the signal chain
Convert your vinyl records to digital audio files with your recording software

 

Audio-Technica Consumer AT-LP120XUSB Specs

Motor DC Servo
Drive Method Direct Drive
Speeds 33 1/3, 45, 78 rpm
Tonearm Type S-Shaped
Effective Arm Length 9.075″ / 230.5 mm
Overhang 0.63″ / 16 mm
Tracking Error Angle <3°
Torque Starting: >1 kgf.cm
Brake System Electronic
Cartridge Weight Applicable: 3.5 to 8.5 g
Anti-Skating Range 0 to 4 g
Signal to Noise Ratio >50 dB
Wow and Flutter <0.2% (WTD) @ 3 kHz (JIS)
Headshell Model: AT-HS6
Mount: 1/2″ Mount
Cartridge AT-VM95E
Stylus 0.3 x 0.7 Mil Elliptical
Output 1 x Stereo RCA Phono / Line Pair (Switchable Preamplifier)
1 x USB 1.1
Output Level Phono: 4 mV Nominal at 1 kHz, 5 cm/sec
Line: 240 mV Nominal at 1 kHz, 5 cm/sec
D/A Converter 16-Bit / 44.1 kHz or 48 kHz, USB Selectable
Gain Phono Preamp: 36 dB Nominal, RIAA Equalized
Turntable Platter Die-Cast Aluminum
System Requirements Windows 7 or Above or Mac OS X or Above
Available USB Port (USB 1.1 or Higher)
Power Requirements 120 VAC, 60 Hz
Power Consumption 3 W
Dimensions (W x H x D) 17.8 x 5.57 x 13.86″ / 452 x 141.6 x 352 mm
Weight 17.6 lb / 8 kg Without Dust Cover